Red Watch

Throttle Link Rod Assembly - Fixed - Complete with Nylon Knuckle Joints - RH - RS1776

Triumph Stag Carburettor Linkage and Fittings

Triumph Stag  Accelerator Linkage

Obviously the rods are extendable ... so before you ask:

Approximate maximum length of the larger piece without the nylon Ball cup inserted is 100mm (The nylon ball cup end will extend it by approximately 15mm on each end.)

The shorter rod is 90mm and again the nylon ends would extend the rod by approximately 15mm each end.

The standard ball fitting for these ends is part number 147918

TR Register