Superflex Polyurethane Trunnion Seal to Vertical Link (Kit of 2) SF2253K

Stock Status for This Item

Out of Stock; See ETA Tab for arrival date

Red Watch

Superflex Polyurethane Trunnion to Vertical Link Kit of 2 - SF2253K

Note this part only fits the original trunnions, the aftermarket units are larger

Note also these are supplied as the current crop of "oem" style rubber units seem to perish and disintergreate at an alarming rate... and as we all know its a real pain to put a fresh unit on the trunnion.

They are vital to keep  dust, water and debris out of the very vulnerable steering trunnions! 

Kit Comprises:
2 Trunnion to vertical link bushes

Manufactured in The United Kingdom

This item has a Shore Hardness Rating of : 70

Guide to Hardness Selection (The Rating is based upon the Shore Hardness Scale)
As a general guide the rating of 60 Shore will imitate original rubber parts hardness for your car.
 
50, 60, 70 Shore - Typically subframe mountings, replacement of pu foam shock mounts etc. where low NVH (Noise Vibration & Hardness) is a priority and situations where compliance is desirable.
 
80, 88 Shore - Typically wishbone, radius rod, non coil over shock eye bushes
 
90 Shore - Typically leaf spring eyes or more heavily loaded wishbones & radius arms, trunnion bushes where replacing rubber
 
95 Shore - Typically intensely loaded coil over shock bushes, trunnion bushes where replacing nylon.

This Set of Superflex Polyurethane Trunnion Seals are suited for use on the following:

Triumph TR2
Triumph TR3
Triumph TR4
Triumph TR4a
Triumph TR5
Triumph TR6

Alternate part numbers 142402