NDS 20 Ton Hydraulic Shop Press - 20 Ton WT350103
We are pleased to offer our latest version of the NDS Brand 20 Ton Shop Press under our NDS Brand - WT350103
Please note that we cannot dispatch this item without a Cell Phone Number on your contact details.
Now if you are working on that Classic Car, slaving away in your Commercial garage, putting oversized bearings and bushes into holes that seem too small?Ý and you??ve tried hitting it with a hammer or a punch?Ý or even tried to squeeze it with a Bench Vice?Ý. Go On?Ý make your life easy?Ý
Have a look at our You Tube Video.
(video shows a 12 Ton in action, but the principles are the same)
Get a Shop Press like this one. 20 ton Hydraulic Shop Press Model # WT350103
Robustly constructed out of 5mm Steel this Shop Press stands a full 1.57m High.
The 20 Ton Bottle Jack with Handle is well set up to provide accurate pressure where and when you need it.
Note the adjustable screw head on the bottle jack as pictured which allows for fine adjustment of the press.
The Pressure Plate is adjustable up and down using two Zinc Coated adjustment pins.
The Bottle Jack plate is raised and lowered under spring tension to ensure easy release when needed.
The Full Specs on the machine are:
Gross Weight 91 KG Net Weight 85kg
Height: 1.57m
Overall Width: 680mm
Width between the uprights 480mm
Depth of the pressing plate area is 200mm overall
Gap between the pressing plates is 95mm
Maximum ?? Minimum height of Pressure Plate : 100mm ?? 900mm (Adjustable)
Two Steel Anvil Plates are provided : 200mm x 70mm x 30mm
Note the nett size of the upper pressure plate assembly is 495mm x 194mm.
When the 20 Ton Jack is fully extended and used as a jack the total height would be 450mm. The restrictions of the springs that support the jack platform when used as a Press may not allow that amount of travel. The minimum height of the jack is 235mm
DEC152024
Note the Freight / Shipping Charges. We will contact you to confirm address and freight charges.