Jack Stands 6 Ton Axle Stands 6 Ton (Pair) - Two Stands WT46001
We offer a pair of Axle Stands rated for 6Ton.
Each stand comprises the base,coated in red with the iron raising support stem.
There is a large saddle at the top of the ratchet stem
Lowered Height : 40cm as pictured
Fully Raised Height : 60cm as pictured
Base size : Rectangular 280mm x 255mm
An instruction manual and safety warning leaflet is included with the product.
The Stands are only ever sold as a pair.
Small amount of assembly required after receipt of the product.
The Lifting Post Stem must be inserted into the base and the locking tab bent over to ensure that it remains in place.
The stem is raised and lowered using a positive ratchet lock system. Very simple to use.
The Stands should only ever be used as a Pair and on one end of the vehicle at a time.
Please consider all safety issues when using this product and NEVER venture underneath a vehicle that is supported on a jack system.
Note the safety label on each stand and do not remove the label attached to each stand.
Approximate Shipping Charges. To be charged after you complete the purchase. We will contact you to confirm address and freight charges.
| Auckland | $ 14.95 |
| Auckland Rural | $ 19.95 |
| North Island | $ 24.95 |
| North Island Rural | $ 29.95 |
| South Island | $ 36.95 |
| South Island Rural | $ 39.95 |
We offer a pair of Axle Stands rated for 6Ton.
Each stand comprises the base,coated in red with the iron raising support stem.
There is a large saddle at the top of the ratchet stem
Lowered Height : 40cm as pictured
Fully Raised Height : 60cm as pictured
Base size : Rectangular 280mm x 255mm
An instruction manual and safety warning leaflet is included with the product.
The Stands are only ever sold as a pair.
Small amount of assembly required after receipt of the product.
The Lifting Post Stem must be inserted into the base and the locking tab bent over to ensure that it remains in place.
The stem is raised and lowered using a positive ratchet lock system. Very simple to use.
The Stands should only ever be used as a Pair and on one end of the vehicle at a time.
Please consider all safety issues when using this product and NEVER venture underneath a vehicle that is supported on a jack system.
Note the safety label on each stand and do not remove the label attached to each stand.