Stock Status for This Item

Out of Stock; See ETA Tab for arrival date

Red Watch

Clevis Pin 5/16 x 1 1/16 Long For Clutch Slave Cylinder

Worn or corroded Clevis pins are the source of many poor functioning Clutch and Brake mechanisms on many Classic Cars. make sure yours are up to scratch using this set of new zinc plated pins

CLZ Clevis Pins are measured from under the head of the pin to the centre of the split pin hole

This pin measures:

Length in inches: 1 1/16". Diameter in inches: 5/16".

Length in millimeters: 27mm. Diameter in millimeters: 7.94mm.

This Clevis Pin has many applications in Classic Cars including Cutch & Brake Slave Cylinders & Master Cylinder linkages

Clutch slave cylinder push rod clevis pin. 2K5622 / CLZ518

You will receive Three of these Pins when you complete this purchase

As a Clutch Slave Cylinder Link it suits the following vehicles:

Clevis Pin for all 948-1275cc inline clutch slave cylinders to release fork.

MGA

MGB

MG Midget (Not 1500)

Morris Marina 1800

Morris Oxford V & VI

Austin A55 & A60

Alternate part Numbers

CLZ517

CLZ518

2K5622