Classic Mini Engine Steady Bar Polyurethane Bush Kit (6pc kit) C-STR630

Stock Status for This Item

Out of Stock; See ETA Tab for arrival date

Red Watch

1. Classic Mini  Engine Steady Bar  Poly bush kit       C-STR630
   
2. 
   
3. Classic Mini Engine Stabilizer Bush Kit 
4. 
   
5. 1 kit fits 1 steady rod.
6. Kit comprises:
7. 4 pc Bushes and two Stainless inserts
   
8. 
   
9. If you are tired of replacing the lower quality engine steady bushes... Have a look at these Poly Bushes available in this kit.
   
10. 
    Engine steady (stabilizer) rod bush kit for Classic Austin, Morris, Leyland And Rover Minis, including Clubmans.
    
11. 
    These are uprated polyurethane bushes and will give much improved stability but at the expense of a bit more noise and vibration.
    
12. 
    These bushes are harder than standard rubber bushes so they are essential for track and rally use.
    
13. 
    This item has a Shore Hardness Rating of : 80
    
14. 
    
15. Guide to Hardness Selection (The Rating is based upon the Shore Hardness Scale)
    
16. 
    As a general guide the rating of 60 Shore will imitate original rubber parts hardness for your car.
    50, 60, 70 Shore - Typically subframe mountings, replacement of pu foam shock mounts etc. where low NVH (Noise Vibration & Hardness) is a priority and situations where compliance is desirable.
     
    80, 88 Shore - Typically wishbone, radius rod, non coil over shock eye bushes
     
    90 Shore - Typically leaf spring eyes or more heavily loaded wishbones & radius arms, trunnion bushes where replacing rubber
     
    95 Shore - Typically intensely loaded coil over shock bushes, trunnion bushes where replacing nylon.
17. 1.