Bush Set - Shock Absorber Mounting - Polyurethane (x2) Triumph TR2 - TR4 Spitfire Herald & Vitesse 102987SP

Bush Set - Shock Absorber Mounting - Polyurethane (x2)  Triumph TR2 - TR4 Spitfire Herald & Vitesse  102987SP

Note this pack includes two Poly Mounting Bushes and a small sachet of Poly Grease 

Note these bushes are "Double Ended". Traditionally you would use a bush from either side of the eye of the Shock absorber,

where as in this case the bush is forced through the eye and then covers both sides of the eye.  

Extra High Quality Poly Urethane Bushes

This item has a Shore Rating of : 80 

Guide to Hardness Selection (The Rating is based upon the Shore Hardness Scale)

As a general guide the rating of 60 Shore will imitate original rubber parts hardness for your car.

50, 60, 70 Shore - Typically subframe mountings, replacement of pu foam shock mounts etc. where low NVH (Noise Vibration & Hardness) is a priority and situations where compliance is desirable.

80, 88 Shore - Typically wishbone, radius rod, non coil over shock eye bushes

90 Shore - Typically leaf spring eyes or more heavily loaded wishbones & radius arms, trunnion bushes where replacing rubber

95 Shore - Typically intensely loaded coil over shock bushes, trunnion bushes where replacing nylon.

Shock Absorber bushes as typically used on:

Triumph TR2 - Front Shock Absorber Lower Eye Bush  - 2 required per Shock Absorber

Triumph TR3 - Front Shock Absorber Lower Eye Bush  - 2 required per Shock Absorber

Triumph  TR4 - Front Shock Absorber Lower Eye Bush  - 2 required per Shock Absorber

TRIUMPH HERALD - Rear Shock  Absorber Upper & Lower Eye Bush. (2 required per Shock Absorber)

TRIUMPH SPITFIRE  Rear Shock  Absorber Upper & Lower Eye Bush. (2 required per Shock Absorber)

TRIUMPH GT6 (NON ROTOFLEX)  Rear Shock  Absorber Upper & Lower Eye Bush. (2 required per Shock Absorber)

TRIUMPH VITESSE (NON ROTOFLEX)  Rear Shock  Absorber Upper & Lower Eye Bush. (2 required per Shock Absorber)

TR Register