Borg & Beck Clutch Kit (Pre Verto) Classic Mini Clutch Kit 3 Pc Diaphragm Type GCK100 HK8854
Red Watch
Classic Mini Clutch Kit 3 Pc Diaphragm Type BORG AND BECK (Pre Verto **) GCK100MS HK8854
This is the diaphragm type clutch which uses the long clutch arm up to the introduction of the short clutch arm Verto type.
Hub Profile 52.8 x 49.4
Number of Parts 3
Number of teeth 32
Kit contains diaphragm, plate and release bearing.
This is genuine AP type.
Aftermarket clutch kit by Borg & Beck but not from the original tooling made and kept under licence by AP the lifelong manufacturer
The original AP tooling has been scrapped.
The clutch covers are good for any engine type in the range but please note the advice below:
This part is Colour Coded : Blue
This means that the kit is good for Classic Mini , 1100 and 1300 Engines that are rated up to 70ft/lbs torque
This would be good for your normal drivers cars of most types
If you need something more competitive please ask.
**(You have a pre-verto clutch if the clutch slave cylinder sitting on top of the flywheel housing is mounted horizontally. If it tips down towards a stubby clutch arm, you have a verto clutch.)
Alternate Part references:
Part No. GCK100MS
Part no. GCK100AF
GCK100
Part Number : GCC103
Borg & Beck Item # HK8854
- Views: 2475
- Product Code: HK8854
- MPN: GCK100
- Location: HW-20
- Availability: Ask us for ETA
- $254.95
- Ex Tax: $221.70
Tags: Borg & Beck Clutch Kit (Pre Verto) Classic Mini Clutch Kit 3 Pc Diaphragm Type GCK100 HK8854, HK8854, Clutch / Gearbox
Borg & Beck Clutch Slave Cylinder Classic Mini (Pre Verto) MG Midget Austin 1100 & Rover P6 GSY110 BES186
Clutch Slave Cylinder to suit Morris, Austin and Leyland Minis from 1959 to Approximately 1983/4......
Borg & Beck Clutch Diaphragm Classic Mini (Pre Verto) Standard ( Blue) GCC103
Borg & Beck Clutch Diaphragm Classic Mini (Pre Verto) Standard ( Blue) GCC103Classic Mini ..
THIN RING GEAR FOR MINI WITH INERTIA STARTER MOTOR. 22G2613.
THIN RING GEAR FOR MINI WITH INERTIA STARTER MOTOR. 22G2613. ..
Mini Engine to Gearbox Nut Bolt & Washer Mounting Kit. MSSK060
Mini engine to gearbox nut and bolt kit. Contains all nuts, bolts and washers to fit gearbox to e..
Classic Mini Pre Verto Clutch Release Thrust Bearing. GRB201
Classic Mini Pre Verto Clutch Release Thrust Bearing. GRB201 For the complete Pre-ver..
Gasket Classic Mini Clutch Housing Case Gasket. Unipart. GUG705563GM
Classic Mini Clutch Housing Case Gasket. Unipart. GUG705563GMMini clutch case / clutch ..
Classic Mini ( Pre Verto ) MG Midget Austin 1100 & Rover P6 Clutch Slave Cylinder. GSY110
Clutch Slave Cylinder to suit Morris, Austin and Leyland Minis from 1959 to Approximately 1983/4......