Triumph Herald & Spitfire Complete Rear Brake Overhaul Kit. 201246KIT

*IMPORTANT - You need to select the correct Brake Cylinder size for your car.

Note:

Brake Cylinder GWC1202 is rated at 5/8" or 15.87mm Diameter

Brake Cylinder GWC1110 is rated at 11/16' or 17.5mm Diameter

The existing cylinder on your car may give you a clue as to what size is currently installed in the car.

(It can occur on some vehicles that a small casting tab located on the top of some cylinders can slightly foul edge of the casting. If this occurs it is very easily filed flat with no effect on the cylinder or operation).

PLEASE CHECK YOUR CAR MODEL WHEN ORDERING SO THAT WE CAN SUPPLY THE CORRECT SIZE WHEEL CYLINDERS*

Complete rear brake fitting kit to suit:

Spitfire Mk1 to MK3 to Chassis FC89095 (Wheel Cylinder Bore Size: 3/4")

Spitfire Mk3 from Chassis FC89096 plus  MkIV & 1500 to FH80000 (Wheel Cylinder Bore Size: 5/8")

Spitfire 1500 from FH80001 (Wheel Cylinder Bore Size: 11/16")

Herald 948cc & 1200 with Drum brakes all round (Wheel Cylinder Bore size: 5/8")

Herald 1200, 12/50, 1300, 13/60 with Discs on front. (Wheel cylinder Bore size 3/4")

Parts included in this kit are:

( WHEEL CYLINDER SIZE TO BE CONFIRMED WHEN ORDERING)