NDS Hydraulic Shop Press - 12 Ton WT350102

We are pleased to offer our latest version of the NDS Brand 12 Ton Shop Press under the NDS Brand  WT350102

Now if you are working on that Classic Car, slaving away in your Commercial garage, putting oversized bearings and bushes into holes that seem too small… and you’ve tried hitting it with a hammer or a punch… or even tried to squeeze it with a Bench Vice…. Go On… make your life easy…

Have a look at our You Tube Video... Copy and paste the link into your Browser:

Get a Shop Press like this one.

Robustly constructed out of 5mm Steel this Shop Press stands a full 1.36m High.

The 12 Ton Bottle Jack with Handle is well set up to provide accurate pressure where and when you need it.

The Pressure Plate is adjustable up and down using two Zinc Coated adjustment pins.

The Bottle Jack plate is raised and lowered under spring tension to ensure easy release when needed.

The Full Specs on the machine are:

Height: 1.35m

Width: 0.52m

Maximum – Minimum  height of Pressure Plate : 100mm – 750mm (Adjustable)

Two Steel Bearer Anvil Plates are provided : 160mm x 70mm x 15mm 

Cross Member Beam Platform is 6mm Steel 

Gap between the pressing plates is 85mm

All presented in Red and Black as pictured. You will go a long way to beat the convenience of owning one of these tools.

Good for Commercial and Home use.

Supplied as a self-assembly Item with Instructions and in two cartons.

This article is heavy. Please expect some Freight Charges.

Please note that we cannot dispatch this item without a Cell Phone Number on your contact details.

Approximate Shipping Charges. To be charged after you complete the purchase. We will contact you to confirm address and freight charges.