Stock Status for This Item

Out of Stock; See ETA Tab for arrival date

Red Watch

Mounting Bobbin - Triumph Fuel Pump Mounting  - (Sold as a Set of Four)  UKC2451-SetA

The quantity required of this little item varies upon its usage.

However it is a very important part of your cars fuel system set up as it is used to provide flexibilty to the mount and of course to remove vibration from the pumps etc.

It also insulates the various components from the body work.

Note the nominal sizes:

Tip to tip the bobbin is 43mm long

The centre body of the bobbin is 16mm long

The centre body of the bobbin is 16mm OD but it is hex shaped

If your pump etc has been mounted with simple bolts and washers etc... you will do well to swap them back to this original style mount.

For this reason we sell the mounts as a set of four. You will receive four of these units when you complete the purchase.

Mounting Bobbin - UKC2451

As normally used in the following applications.

Triumph Stag Oil Cooler  x 4

Triumph Stag Fuel Pump  x 3

Triumph 2000/2500/2.5Pi Fuel Injection System -  Fuel Pump x 3

Triumph TR5 & TR6 Pressure Relief Valves  x 4

Triumph TR5 Lucas Fuel Pump x 3

Triumph TR6 Fuel Pump x 3

Triumph TR6 Pressure Relief Valve - Pi Early & Late x 2

Triumph TR6 Pressure Relief Valves - Injection  x 4

Triumph TR6 Fuel Pumps - Injection x 3

TR Register