Jack Stands 3 Ton Axle Stands 3Ton (Pair) - WT43001

That's correct... a SET OF TWO STANDS  rated for 3Ton each.

Each stand comprises the base, coated in Silver with the cast iron raising support.

There is a large saddle at the top of the ratchet stem

Lowered Height : 29cm as pictured

Fully Raised Height : 42cm as pictured

Base size :  Rectangular 210mm x 180mm

An instruction manual and safety warning leaflet is included with the product.

The Stands are packed in Pairs so you get One carton.. Total Two Stands.

The saving here is in the freight. We are able to bundle the cartons for you.

Small amount of assembly required after receipt of the product.

The Lifting Post Stem must be inserted into the base and the locking tab bent over to ensure that it remains in place.

The stem is raised and lowered using a positive ratchet lock system. Very simple to use.

The Stands should only ever be used as a Pair and on one end of the vehicle at a time. 

Please consider all safety issues when using this product and NEVER venture underneath a vehicle that is supported on a jack system.

Note the safety label on each stand and do not remove the label attached to each stand.

Approximate Shipping Charges. To be charged after you complete the purchase. We will contact you to confirm address and freight charges.