Classic Mini Front Tie Rod Uprated Bush Kit (Set of 2) C-STR627
Classic Mini Front Tie-Rod Bush Kit (Set of 2) C-STR627
These uprated bushes are designed to reduce brake weave without creating too much rigidity and causing stress on the tie-rods.
They do this by having a softer (black) inner bush and a harder polyurethane bush on the outer.
Beware of poly bush sets that have all hard bushes, these are for highly uprated suspension.
This kit contains enough bushes to do both Tie-rods. It is important that both sides are fitted at the same time.
Instructions are included, this is a reasonably easy job for the home mechanic.
This item has a Shore Rating of : 80
Guide to Hardness Selection (The Rating is based upon the Shore Hardness
Scale)
As a general guide the rating of 60 Shore will imitate original
rubber parts hardness for your car.
50, 60, 70
Shore - Typically subframe mountings, replacement of pu foam shock mounts etc.
where low NVH (Noise Vibration & Hardness) is a priority and situations
where compliance is desirable.
80, 88 Shore - Typically wishbone,
radius rod, non coil over shock eye bushes
90 Shore - Typically leaf
spring eyes or more heavily loaded wishbones & radius arms, trunnion bushes
where replacing rubber
95 Shore - Typically intensely
loaded coil over shock bushes, trunnion bushes where replacing nylon.
Part Number: C-STR627