Borg & Beck Clutch Kit (Pre Verto) Classic Mini Clutch Kit 3 Pc Diaphragm Type GCK100MS HK8854

Classic Mini Clutch Kit 3 Pc Diaphragm Type BORG AND BECK (pre Verto)    GCK100MS    HK8854

This is the diaphragm type clutch which uses the long clutch arm up to the introduction of the short clutch arm verto type.

Kit contains diaphragm, plate and release bearing.

This is genuine AP type. 

Aftermarket clutch kit by Borg & Beck but not from the original tooling made and kept under licence by AP the lifelong manufacturer--The original AP tooling has been scrapped.

The clutch covers are good for any engine type in the range but please note the advice below:

This part is Colour Coded : Blue

This means that the kit is good for Classic Mini , 1100 and 1300 Engines that are rated up to 70ft/lbs torque

This would be good for your normal drivers cars of most types

If you need something more competitive please ask.

Alternate Part references: 

Part No. GCK100MS

Part no. GCK100AF

Part Number :  GCC103

Borg & Beck Item #  HK8854

(You have a pre-verto clutch if the clutch slave cylinder sitting on top of the flywheel housing is mounted horizontally. If it tips down towards a stubby clutch arm, you have a verto clutch.)