A Series Engine Water Pump - Small Impeller GWP132

BMC & Leyland A Series Engine Water Pump - Small Impeller    GWP132

Fits small A series engines 848, 998 & 1098cc

Alternate Part Number : 10M294

To increase coolant flow on some engines, it may be better fitted with the GWP134 pump with the larger impeller, but on 848cc & 998cc engines this may result in the impeller fouling on the water jacket of cylinder 1.

This can be overcome with a thicker gasket or some slight modification of the impeller

For All early engines. Non Genuine as original Airtex tooling that Rover used has been scrapped.

Aluminum body with by pass hose take off, this original type pump has a small cast metal impeller for early A series engines. Further reduction of cavitation is achieved by using a large diameter water pump pulley as originally fitted to the Cooper S and reintroduced on the A-Plus engines. It is necessary to check clearance between the large pulley and the head, if a lot of material has been machined from the head face it may foul the pulley.

Small bore engines with 12G940 heads can't use CAM6408 and it is necessary to modify the top edge of the high capacity water pump or the 12G940 head will rest on the pump and not seal properly, modify for at least 1/16" gap.

This original small cast impeller type pump did not churn water as much as the current later GWP134 large impellor pump.

MG Midget  (up to approximately 1968)

Austin Healey Sprite

Morris Minor

Alternate part numbers

GWP132

GWP101